Check Dhcp-Server Configuration And Status; Get Debug Output From The Dhcp-Server - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Check DHCP-server configuration and status
This procedure describes how to check the configuration and current status of the DHCP-server
Mode: Any
Step Command
1 node (cfg) #show dhcp-server Displays configuration and status information
Example:
SN(ctx-ip)[router]#show dhcp-server
The DHCP server is running
Profiles
LAN (active)
Network
Include
Lease Time
Default Router
Domain Name Server
Bound leases
192.168.1.32 (Dufour)
Address : ethernet:00.10.A4.7C.7A.F8
Client Id : 01.00.10.A4.7C.7A.F8
Expires : 2002-12-06T21:18:04

Get debug output from the DHCP-server

This procedure describes how to enable/disable the DHCP-server debug monitor
Mode: Any
Step Command
1 node (cfg) #[no] debug dhcp-server Enables / disables the debug monitor of the DHCP-server
DHCP-server configuration tasks
: 192.168.1.0 255.255.255.0
: 192.168.1.32 - 192.168.1.63
: 2 days
: 192.168.1.1
: 80.254.161.125
: 80.254.161.126
20 • DHCP configuration
Purpose
Purpose
243