Patton electronics SmartNode Series Software Configuration Manual page 330

25 • Session router configuration
We assume that the CS interfaces have already been created and configured. So we can start directly with the
session router elements.
Since the command sequence is quite long it is useful to create the configuration offline and download it using
TFTP. Note in the following lines the prompt is omitted as in a configuration file and for better readability.
#-------------------------------------------------------------
# Session Router Config File
#-------------------------------------------------------------
context cs switch
#
# Bearer capability routing table
#
bearer-capability ISDNservice ud dest-interface local_ba
bearer-capability ISDNservice default dest-table dest_a
#
# Called party number routing table
#
called-party dest_a 0 dest-interface local_ba CACorange
called-party dest_a 00 dest-interface node_c CLImelon
called-party dest_a 074 dest-interface local_ba CACapple
called-party dest_a 075 dest-interface local_ba CACapple
called-party dest_a 076 dest-interface local_ba CACapple
328
Figure 63. CS context and session router elements
ISDNservice
dest_a
SmartWare Software Configuration Guide
Example