Configure Voice Volume - Patton electronics SmartNode Series Software Configuration Manual

30 • VoIP profile configuration
Mode: Profile VoIP
Step
1 node (pf-voip)[ name ]#silence-
compression
2 node (pf-voip)[ name ]#exit
node (cfg)#context cs
3
node (ctx-cs)[switch]#interface isoip name
4
or
node (ctx-cs)[switch]#interface h323
name
5 node (if- type )[ if-name ]#no silence-
compression
Example: Enable silence compression
The following example shows how to enable the silence compression for the VoIP profile.
SN>enable
SN#configure
SN(cfg)#profile voip ISoIPProfile
SN(pf-voip)[ISoIPPr~]#silence-compression
Configure voice volume
The voice volume determines the voice output volume gain towards CS context as illustrated in
382
Command
Figure 76. Applying voice volume
SmartWare Software Configuration Guide
Purpose
Enable silence compression and comfort noise
Optional:
Change to CS interface configuration mode to
overwrite the settings in the VoIP profile in a spe-
cific CS interface
Disable silence compression and comfort noise on
a specific interface
VoIP profile configuration task list
figure 76.