Show And Enable The Gateway Configuration - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
C:\>
Configure and enable H.235:
172.16.224.102(cfg)#gateway h323 h323
172.16.224.102(gw-h323)[h323]#h235security master-password
12d3f4e76a83c6dd1067a6d34fe5cb21
172.16.224.102(gw-h323)[h323]#h235security encrypted-password
21dafa5dfc7399e5cef9cc138dabd22f
172.16.224.102(gw-h323)[h323]#h235security time-window 100
172.16.224.102(gw-h323)[h323]#h235security version v2
172.16.224.102(gw-h323)[h323]#h235security sender-id NODE13
172.16.224.102(gw-h323)[h323]#h235security general-id GK01
172.16.224.102(gw-h323)[h323]#show h235security
H.235 SECURITY SETTINGS
-----------------------
H.235 Security
H.235 Module Version
H.235 Version
Sender ID
General ID
Time Window
Master Password Hash
Debug Monitor:
172.16.224.102(gw-h323)[h323]#
172.16.224.102(gw-h323)[h323]#debug h235security 3
172.16.224.102(gw-h323)[h323]#h235security
172.16.224.102(gw-h323)[h323]#14:27:35
Show and enable the gateway configuration
Finally, before enabling the gateway SmartWare must know which IP interface belongs to which gateway. In
ISoIP this is detected automatically, in H.323 the gateway must be bound to the respective IP interface.
In order to become active the ISoIP or H.323 gateway must be enabled. Before enabling the H.323 gateway it
is possible to display the actual configuration.
This procedure describes how to enable ISoIP or H.323 gateway
Gateway configuration task list
: Disabled
: 2.02.01
: 2
: NODE13
: GK01
: 100 seconds
: bc210d2244a1afd2e7da7a54a1a8c179403220c4
: Disabled
H235 > Info: H.235 was started successfully
29 • Gateway configuration
371