Discarding Excess Load - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
"queue-limit". This improves the performance of TCP flow-control. A burst-tolerance index between 1 and 10
may optionally be specified (exponential filter weight). The no form of this command reverts the queue to
default "tail-drop" behavior.
This procedure describes defining random early detection
Mode: Source
node (src)[ name ]#random-detect { burst-tolerance }

Discarding Excess Load

The command police controls traffic arriving in a queue for class name. The value of the first argument average-
kilobits defines the average permitted rate in kbps, the value of the second argument kilobits-ahead defines the
tolerated burst size in kbps ahead of schedule. Excess packets are dropped.
This procedure describes defining discard excess load
Mode: Source
Command
node (src)[ name ]#police average-kilobits
burst-size kilobits-ahead
Link scheduler configuration task list
Command
13 • Link scheduler configuration
Defines random early detection (RED) for
queues of for the selected class or policy name .
The range for the optional value burst-tolerance
is from 1 to 10.
Defines how traffic arriving in a queue for the selected
class or policy name has to be controlled. The value aver-
age-kilobits for average rate permitted is in the range
from 0 to 10000 kbps. The value kilobits-ahead for burst
size tolerated ahead of schedule is in the range from 0 to
10000.
Purpose
Purpose
155