Configure Call Routing - Patton electronics SmartNode Series Software Configuration Manual

24 • CS interface configuration
Step
6 node (ctx-cs)[ switch ]#show context cs con-
fig
or
node (ctx-cs)[ switch ]#interface if-type <?>
node (ctx-cs)[ switch ]#no interface if-type if-
7
name
Examples: Create an CS interface and delete another
The following example shows how to create and configure an interface, how to display it and how to
delete another.
SN>enable
SN#configure
SN(cfg)#context cs
SN(ctx-cs)[switch]#interface pstn PublicAccess
SN(if-pstn)[PublicA~]#routing dest-interface PBX
SN(if-pstn)[PublicA~]#interface pstn <?>
<name>
PBX
PublicAccess
PublicPSTN
callapp
SN(if-pstn)[PublicA~]#no interface pstn PublicPSTN
SN(ctx-cs)[switch]#interface pstn <?>
<name>
PBX
PublicAccess
callapp
SN(ctx-cs)[switch]#
Configure call routing
SmartWare offers two levels of call routing, basic interface routing and advanced session routing. Basic interface
routing allows you to forward all incoming calls on a CS interface to a destination CS interface. An optional
fallback interface can also be specified.
Advanced session routing allows you to route calls to all available CS interfaces, based on a number of criteria
such as calling number, destination number, and ISDN bearer capability. Further the Session Router also
allows you to modify the calling and called party numbers in the call setup messages.
In the environment of the CS interfaces, it is necessary to specify whether the call will be routed directly to
another CS interface ('basic interface routing') or to a first lookup table from the Session Router (advanced ses-
sion routing).
This procedure describes how to configure basic interface routing
298
Command
Interface name
Existing interface
Existing interface
Existing interface
Existing interface
Interface name
Existing interface
Existing interface
Existing interface
SmartWare Software Configuration Guide
Purpose
Display already defined CS interfaces.
Delete an already defined interface.
CS interface configuration task list