Create A Day Of Week Routing Table; Create A Date Routing Table - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Step
2
Example: Time of day routing table
SN(ctx-cs)[switch]#time workday1 08:00-17:00 dest-table BestQuality
SN(ctx-cs)[switch]#time workday1 17:00-21:00 dest-interface VoIPCarrierA
SN(ctx-cs)[switch]#time workday1 21:00-08:00 dest-interface VoIPCarrierB

Create a day of week routing table

The Day of Week table is used to route calls according to the day of the week. The days are defined by the
abbreviations mon; tue; wed; thu; fri; sat; and sun. To configure weekday routing table entries use the follow-
ing commands starting in the CS context configuration mode.
This procedure describes how to create a day of week routing table
Mode: Context CS
Step
1 node (ctx-cs)[ switch ]#weekday tbl-name key
dest-interface if-name
or
node (ctx-cs)[ switch ]#weekday tbl-name key
dest-table tbl-name
2
Example: Day of week routing table
SN(ctx-cs)[switch]#weekday DayTable1 sat dest-table LeastCost
SN(ctx-cs)[switch]#weekday DayTable1 sun dest-table LeastCost
SN(ctx-cs)[switch]#weekday DayTable1 default dest-interface VoIPCarrierA

Create a date routing table

The Date table is used to route calls according to the current system date. It can be used for example to repre-
sent holidays in the routing decision tree. The table matches exact dates or date ranges.
This procedure describes how to create a date routing table
Session router configuration task list
Command
Command
25 • Session router configuration
Purpose
Repeat step 1 to add lines for multiple table
entries.
Purpose
Create a day of week routing table by adding the
first line.
Repeat step 1 to add lines for multiple table
entries.
319