Disabling A Frame Relay Pvc - Patton electronics SmartNode Series Software Configuration Manual

14 • Serial port configuration
Frame Relay PVC. If serial Frame Relay PVC shall be used as WAN access a suitable name for the logical IP
interface could be wan as in
Figure 39. IP interface 'wan' is bound to PVC 1 on port serial 0 0
This procedure desribes how to bind the Frame Relay PVC dlci on the serial interface to the logical IP interface
name, which is related to the IP context router
Mode: PVC
Step
1 node (pvc)[ dlci ]#bind interface name router
Example: Binding the Frame Relay PVC to IP interface
The following example binds the Frame Relay PVC 1 to the IP interface wan of IP context router to the serial
interface on slot 0 and port 0 of a SmartNode 2300 series device.
SN(cfg)#port serial 0 0
SN(prt-ser)[0/0]#framerelay
SN(frm-rel)[0/0]#pvc 1
SN(pvc)[1]#bind interface wan router

Disabling a Frame Relay PVC

Frame Relay PVCs can be disabled whenever it is necessary. Be aware that disabling a specific PVC also disables
the related serial interface and vice versa.
This procedure desribes how to disable the Frame Relay PVC dlci on the serial interface
170
figure 39 below.
Command
SmartWare Software Configuration Guide
Purpose
Binds Frame Relay PVC dlci to the IP interface
name of IP context router
Serial port configuration task list