Mouse Conventions; Service - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Mouse conventions

The following conventions are used when describing mouse actions:
Convention
Left mouse button
Right mouse button
Point
Click
Double-click
Drag

Service

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All
returns must have a Return Materials Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
• Tel: +1 (301) 975-1007
• Email: support@patton.com
• URL: http://www.patton.com
Note
Table 2. Mouse conventions
This button refers to the primary or leftmost mouse button (unless you have
changed the default configuration).
This button refers the secondary or rightmost mouse button (unless you have
changed the default configuration).
This word means to move the mouse in such a way that the tip of the pointing
arrow on the screen ends up resting at the desired location.
Means to quickly press and release the left or right mouse button (as instructed in
the procedure). Make sure you do not move the mouse pointer while clicking a
mouse button.
Means to press and release the same mouse button two times quickly
This word means to point the arrow and then hold down the left or right mouse but-
ton (as instructed in the procedure) as you move the mouse to a new location.
When you have moved the mouse pointer to the desired location, you can release
the mouse button.
Packages received without an RMA number will not be accepted.
Meaning
About this guide
19