Port_Isdn; Redboot Bootloader Command Set; Show Help; Show Command History - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
[no] use profile pots <file>
up
exit

port_isdn

port {pstn | isdn } <slot> <port>
[no] down
[no] channel-range <low> <high>
channel-hunting {up | down | up-cyclic | down-cyclic }
l2proto {pp | pmp }
l3proto {dss1 | pss1 }
channel-numbering {etsi | pss1-old }
[no] loop <channel>
[no] max-channels <channels>
[no] smart-disconnect {from-isdn-calls | to-isdn-calls }
uni-side {net | usr }
clock-mode {master | slave }
[no] permanent-layer2
[no] send ais
[no] pstn-loopback {payload-ts0-regenerated | payload-ts0-transparent | remote-no-
jitter-attenuator | remote-with-jitter-attenuator }
line-code {ami | hdb3 | b8zs }
[no] caller-id {pre-ring | 1 } [format {bell | etsi } ]
end-of-call signaling {busy tone (loop-break <key_dur> ) } ]
[no] meter-pulses
[no] subscriber-number <key_number>
[no] up
exit
exit
exit
exit

RedBoot Bootloader command set

Show help

Step 1

Show command history

Step 1
Use CTRL-N and CTRL-P to browse. The cursor keys (up, down) are not working.

RedBoot Bootloader command set

Command
help [ topic ]
Command
history
B • Configuration mode overview
Purpose
Shows command help.
Purpose
Shows command history.
431