Patton electronics SmartNode Series Software Configuration Manual page 339

SmartWare Software Configuration Guide
Example: Show call-progress-tone profile
The following example shows how to display the call-progress-tone profiles.
SN#show profile call-progress-tone
Profiles:
---------
defaultDialtone:
Play 5000ms (425Hz at 0dB)
defaultAlertingtone:
Play 1000ms (425Hz at -7dB)
Pause 4000ms
defaultBusytone:
Play 500ms (425Hz at -7dB)
Pause 500ms
myprofile:
Play 5000ms (425Hz at 0dB and 3000Hz at 0B)
This procedure describes how to show tone-set profiles
Mode: Administrator exec
Step
1 node #show profile tone-set [ name ]
Example: Show tone-set profile
The following example shows how to display the tone-set profile.
SN(cfg)#show profile tone-set
Tone set default
------------------------------------------------
DTMF high frequency level: 0 dBm
DTMF low frequency level:
DTMF duration:
DTMF interspace:
------------------------------------------------
Call progress Tone mapping:
dialtone -> defaultDialtone
alertingtone -> defaultAlertingtone
busytone -> defaultBusytone
Tone configuration task list
26 • Tone configuration
Command
0 dBm
0 ms
0 ms
Purpose
Display all tone-set profiles or a specific with name
name
337