Config Tcp-Sync-Rate - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

IP Unicast Commands

config tcp-sync-rate

config tcp-sync-rate <number_sync_per_sec>

Configures a limit for the switch to process TCP connection requests.

Syntax Description

number_sync_per_sec

Specifies a time in seconds.

Usage Guidelines

If the connection request rate is higher than the specified rater, or the total number of outstanding

connection requests exceed the system limit, the system ages out incomplete connection requests at a

faster rate. The range is from 5 to 200,000.

The following command configures a 50 second limit for the switch to process TCP connection requests:

config tcp-sync-rate 50

This command was first available in ExtremeWare 6.2.

Platform Availability

This command is available on "i" series platforms.

ExtremeWare Software 7.0.0 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.0.0