Timeout - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

timeOut

Used to set or clear idle telnet connection timeout value.
Synopsis
timeOut [0 | minutes]
Availability
all users (display)
admin (set/clear)
Description This command changes the telnet timeout value used by the shell. The default value of zero means
that telnet timeouts are disabled. A non-zero value specifies the number of minutes to wait before
an idle telnet session is timed out. The minimum value is 1 minute, the maximum is 512640
minutes (1 year).
Operands
This command has the following operands:
0
minutes
Example
To display the current telnet timeout value, then change it to 10 minutes:
See Also
help
version
1-266
Specify a 0 to disable telnet timeouts. This operand is optional.
Specify a number of minutes before an idle telnet session is timed out. This
operand is optional.
switch:admin> timeOut
TimeOut is Disabled
switch:admin> timeOut 10
Committing configuration...done.
TimeOut is now 10 minutes
Fabric OS Reference