trackChangesSet
Enables configuring of track-changes feature.
Synopsis
trackChangesSet [ 0|1 ], [ snmptrapmode ]
Availability
admin
Description
This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be
enabled. Trackable changes are:
•
Successful login
•
Unsuccessful login
•
Logout
•
Config file change from task
•
Track-changes on
•
Track-changes off
The output from the Track Changes feature is dumped to the error log for the switch. Use the
errDump command or errShow command to view the error log.
Operands
This command has the following operands:
0|1
snmptrapmode
Example
Below are two examples. The first sets the track-changes feature and disables SNMP TRAP
messages. The second disables both the track-changes feature and SNMP TRAP messages.
See Also
agtcfgSet
agtcfgShow
Fabric OS Reference
Specify 1 to enable the track-changes feature or specify 0 to disable the feature.
The default (if no operand is specified) is to disable the track-changes feature.
This operand is optional.
Specify 1 to enable errors to be sent to the SNMP-TRAP in addition to the errlog
or specify 0 to disable the SNMP-TRAP messages. The default (if no operand is
specified) is to disable SNMP-TRAP messages. This operand is optional.
switch:admin> trackChangesSet 1, 0
0x10f9bcd0 (tShell): Feb 10 15:04:38
Error TRACK-TRACK_ON, 4, Track-changes on
Committing configuration...done.
0x10f9bcd0 (tShell): Feb 10 15:04:42
Error TRACK-CONFIG_CHANGE, 4, Config file change from task:tShell
switch:admin> trackChangesSet 0, 0
0x10f9bcd0 (tShell): Feb 10 15:04:50
Error TRACK-TRACK_OFF, 4, Track-changes off
Committing configuration...done.
1
Telnet Commands
1-269