Qlshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

qlShow

Displays QuickLoop information.
Synopsis
qlShow
Availability
All users
Description
Use this command to display the following QuickLoop information:
Self:
Peer:
State:
Scope:
AL_PA bitmap: The AL_PA bitmaps of devices on the QuickLoop
Remote AL_PAs
Local AL_PAs
Local looplet state
Member:
Online:
Looplet:
Operands
None.
Fabric OS Reference
Worldwide name and domain ID of this switch
Worldwide name and domain ID of partner switch. Peer is displayed only if the
switch has a partner configured
The state of the QuickLoop
•
Master - Master switch in dual switch QuickLoop
•
Non-master - Non-master in dual switch QuickLoop
•
Local Lip - Looplet on local switch lipped
•
Remote Lip - Looplet on partner switch lipped
•
Online - Switch is online
•
Offline - Switch is offline
Dual or single (indicating dual or single switch QuickLoop)
AL_PAs of devices on partner switch. AL_PAs are listed per port base.
AL_PAs of devices connected to this switch. AL_PAs are listed per port base.
Indicates state of local looplet
Current QuickLoop member ports
Current online ports in the QuickLoop
The state of each looplet. The possible states are:
•
Online : Loop initialization completed
•
Lipped : NL_Port initiated LIPs
•
Lipping : FL_Port initiated LIPs
•
Initializing: Looplet initialization in progress
•
Bypassed: Looplet being bypassed
•
Error : Error found in this looplet
•
Offline : Looplet offline
1
Telnet Commands
1-215