HP StorageWorks 8B - FC Entry Switch Reference Manual page 200

1
Telnet Commands
Table 1-13 portLogShow Command Field Descriptions (Continued)
Field Possible Values
args The command arguments description depends on event type:
star
disable
enable
ioctl
Tx & Rx
reject
busy
ctin
[A]
[B]
ctout
[A]
[B]
errlog
loopscn
OLP
LIP
LIM
OLD
TMO
1-186
start type: 0 = enable ports, 100 = disable ports
state can be one of the following: 1 - Online, 2 - Offline, 3 - Testing, 4 - Faulty,
5 - E_Port, 6 - F_Port, 7 - Segmented.
mode: 0 = normal, non-zero = loopback
I/O control arguments. Refer to Table 1-15 for a list of ioctl code values.
first two header words and first payload word
FC-PH reject reason
FC-PH busy reason
Argument 0 is divided into two 16-bit fields:
bit map indicating validity of subsequent args
(0001 = argument 1 is valid, 0003 = arguments 1 and 2 are valid).
ct-based service command code. Argument 1 = first word of the CT payload, if
applicable (as specified in [A]). Argument 2 = second word of the CT payload,
if applicable (as specified in [A]).
Argument 0 is divided into two 16-bit fields:
bit map indicating validity of subsequent args (0001 = argument 1 is valid,
0003 = arguments 1 and 2 are valid).
CT command code indicating an accept (8002) or a reject (8001). If [B] is an
accept, argument 1 and 2 represents the first and second words of the CT
payload, if applicable (as specified in [A]). If [B] is a reject, argument 1
contains the CT reject reason and explanation code.
Error type (see errShow) create - name of the task being created
description depends on loop state:
offline reason code, usually zero
Reason code for LIPs initiated by FL_Port, if the code value is 800x (x =
[1,0xc], see below), or the lower two bytes of the LIP received, if the code
value is other than 800x. Refer to Table 1-16 for a list of LIP code values.
usually zero BMP: memory address for the loop bitmap
usually zero
Encoded value of state when loop initialization timed out. This value is usually
equal to the first word of a loop initialization frame payload. Refer to
Table 1-17 for a list of TMO code values.
Fabric OS Reference