Perfdelfiltermonitor - HP StorageWorks 8B - FC Entry Switch Reference Manual

perfDelFilterMonitor

Delete a filter-based monitor.
Synopsis
perfDelFilterMonitor port[, monitor]
Availability
admin
Description
Use this command to delete a filter-based monitor.
After a successful execution of this command, the telnet shell confirms that this monitor has
successfully been deleted. Prior to issuing this command, verify all the valid monitor numbers and
user-defined aliases on a specific port using the perfShowFilterMonitor command to make sure
that the right monitor will be deleted.
Operands
This command has the following operands:
port
monitor
Example
To delete filter monitor 4 on port 2:
See Also
perfShowFilterMonitor
perfAddUserMonitor
Fabric OS Reference
Specify the port number where you want to remove a filter monitor. This operand
is required.
Specify the monitor number you want to delete. Monitor numbers are defined
when you create the monitor on a port. This operand is optional. If not specified,
all monitors on the port are deleted.
switch:admin> perfDelFilterMonitor 2, 4
The specified filter-based monitor is deleted.
switch:admin>
1
Telnet Commands
1-157