Perfshowalpacrc - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

perfShowAlpaCrc

Display the ALPA CRC count by port or by ALPA.
Synopsis
perfShowAlpaCrc port[, ALPA]
Availability
admin
Description
Use this command to display a specific ALPA device CRC error count by the port or ALPA. If the
ALPA operand is specified, only the CRC count for that ALPA device is displayed. If the ALPA
operand is not specified, the CRC count for all the ALPA devices on a specified port are displayed.
CRC count is a 64-bits counter. When the count is over 32 bits, the CRC count value is displayed in
hexadecimal. Otherwise, CRC count is displayed in decimal format.
Operands
This command has the following operands:
port
ALPA
Example To display the CRC error count for all ALPA devices on port 5:
See Also
perfClrAlpaCrc
1-160
Specify the port number where you want to count the CRC errors. This operand
is required.
Specify the ALPA address if you want to get the CRC errors for a particular
device. This operand is optional.
switch:admin> perfShowAlpaCrc 5
AL_PA CRC count
-------------------
0x01 0
switch:admin>
Fabric OS Reference