Agtcfgset - HP StorageWorks 8B - FC Entry Switch Reference Manual

agtcfgSet

Modify the SNMP agent configuration.
Synopsis
agtcfgSet
Availability
admin
Description
Use this command to modify the configuration of the SNMP agent in the switch. Set the values for
the following items:
•
sysDescr - Specify the switch description (in MIB-II definition). The default value is
Fibre Channel Switch.
•
sysLocation - Specify the location of the switch (in MIB-II). The default value is End
User Premise.
•
sysContact - Specify the contact information for this switch. The default value is Field
Support.
•
swEventTrapLevel - Specify the event trap level in conjunction with an event's severity
level. When an event occurs, and if its severity level is at or below the set value (that is, more
critical), the SNMP trap, swEventTrap, is sent to configured trap recipients. The default
value is 0 which means that no swEventTrap is sent. Possible values are:
0 - None
1 - critical
2 - error
3 - warning
4 - informational
5 - debug
See errShow for more information.
•
authTrapsEnabled - Specify whether authorization traps are passed to the trap recipient.
The default value is False (off), meaning no messages are sent. A value of True (on) means that
authorization trap messages are sent to the community IP addresses configured below. For
SNMPv1 and SNMPv2c, this indicates that a request containing a community string is not
known to the agent.
•
There are six communities, each with a respective trap recipient, supported by the agent. The
first three communities are for read-write access (rw) and the last three are for read-only access
(ro).
Specify the IP address for each management station:
Community 1: Secret C0de - The default value for this trap recipient is '0.0.0.0'.
Community 2: OrigEquipMfr - The default value for this trap recipient is '0.0.0.0'.
Community 3: private - The default value for this trap recipient is '0.0.0.0'.
Community 4: public - The default value for this trap recipient is '0.0.0.0'.
Community 5: common - The default value for this trap recipient is '0.0.0.0'.
Community 6: FibreChannel - The default value for this trap recipient is '0.0.0.0'.
Fabric OS Reference
1
Telnet Commands
1-3