Qloopcreate - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

qloopCreate

Create a QuickLoop.
Synopsis
qloopCreate "qloopname", "member;member"
Availability
admin
Description
Use this command to create a QuickLoop.
A QuickLoop name must begin with a letter and be followed by any number of letters, digits, and
underscore characters. Names are case sensitive, for example "Qloop_1" indicates a different
QuickLoop than "qloop_1". Blank spaces are ignored.
The QuickLoop member list must have one or two members; an empty list is not allowed.
When a configuration is enabled, all QuickLoops defined in the configuration must resolve to a
maximum of two switch worldwide names.
Zone alias names entered as members of this QuickLoop must be defined with WWNs. Zone alias
names that are defined by domain and port number, or AL_PA are not accepted as members of the
QuickLoop.
Operands The following operands are required:
qloopname
member
Example To create two QuickLoops, a single switch and one dual switch:
See Also
qloopAdd
qloopDelete
qloopRemove
qloopShow
1-204
Specify the name of QuickLoop to be created, in quotation marks. The
qloopname cannot be used for another zone object.
Specify a list of members to be added to QuickLoop, in quotation marks,
separated by semi-colons. Include one or more of the following:
•
Worldwide names
•
Zone alias names
switch:admin> qloopCreate "qlp1", "10:00:00:60:69:00:60:11"
switch:admin> qloopCreate "qlp2", "wwn2; wwn3"
Fabric OS Reference