Qldisable - HP StorageWorks 8B - FC Entry Switch Reference Manual

qlDisable

Disables QuickLoop mode.
Synopsis
qlDisable
Availability
admin
Description
Use this command to disable QuickLoop mode on a switch. All QuickLoop ports are re-initialized
to fabric mode, allowing public devices to perform fabric login.
If QuickLoop is being run on dual switches, this command disables the local switch and causes the
partner switch to re-initialize to a single-switch QuickLoop, containing only the devices connected
to the partner switch.
Note:
Operands None.
Example The following entry disables QuickLoop mode:
See Also
qlEnable
qlPortDisable
qlShow
Fabric OS Reference
If Zoning is in use the qlDisable, qlEnable, and qlPartner commands are not in effect. In
this case, the qlPortDisable command can be used to disable individual ports.
switch:admin> qlDisable
1
Telnet Commands
1-209