System Services - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

System Services

The System Services fields are as follows:
Table 1-4
Field
rstatd
rusersd
rapid
Disable RLS probing
Descriptions of the system service setting fields are as follows:
rstatd
rusersd
rapid
Disable RLS probing
1-44
Configure Command System Services Parameters
Dynamically enables or disables a server that returns information about system
operation information through remote procedure calls (RPC). The protocol
provides for a wide-range of system statistics; however, only ethernet interface
statistics (see ifShow) and system up time (see uptime) are supported.
The retrieval of this information is supported by a number of operating systems
which support RPC. Most UNIX-based systems (HP-UX, Irix, Linux, Solaris,
etc.) use the rup and rsysinfo commands to retrieve the information. See your
local system documentation for the appropriate usage of the these or equivalent
commands.
Dynamically enables or disables a server that returns information about the user
logged into the system through remote procedure calls (RPC). The information
returned includes user login name, the system name, login protocol or type, login
time, idle time, and remote login location (if applicable).
The retrieval of this information is supported by a number of operating systems
which support RPC. On most UNIX-based systems (HP-UX, Irix, Linux, Solaris,
etc.) the command to retrieve the information is rusers. See your local system
documentation for the appropriate usage of this or equivalent command.
Dynamically enables or disables a service that handles RPC requests for the API
server.
This disables Read Link Error Status probing of the ALPAs.
Default Range
Off On/Off
Off On/Off
On On/Off
On On/Off
Fabric OS Reference