Cfgremove - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

cfgRemove

Remove a member from a zone configuration.
Synopsis
cfgRemove "cfgName", "member; member"
Availability
admin
Description Use this command to remove a member from an existing zone configuration.
The member list is located by an exact string match, therefore, it is important to maintain the order
when removing multiple members. For example, if a zone configuration contains "cfg2; cfg3;
cfg4" then removing "cfg3; cfg4" succeeds, but removing "cfg4; cfg3" fails.
If all members are removed, the zone configuration is deleted.
Note:
Operands
The following operands are required:
cfgName
member
Example
To remove a zone from a configuration:
See Also
cfgAdd
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgEnable
cfgSave
cfgShow
1-24
This command requires a Zoning License.
Specify a name of a zone configuration, in quotation marks.
Specify a member or list of members to be deleted from the zone configuration,
in quotation marks, separated by semi-colons. Members can be specified in one
or more of the following methods:
•
Zone names
•
QuickLoop names
switch:admin> cfgRemove "Test_cfg", "zone3"
Fabric OS Reference