Portcfgtrunkport - HP StorageWorks 8B - FC Entry Switch Reference Manual

portCfgTrunkport

Configure a port to be enabled or disabled for trunking.
Synopsis
portCfgTrunkport port, 1|0
Availability
admin
Description
Use this command to configure a port to be enabled or disabled for trunking.
Note:
Operands This command has the following operand:
port
1|0
Example
To enable port 5 for trunking:
See Also
switchCfgTrunk
portShow
portCfgShow
switchShow
Fabric OS Reference
This command requires a Trunking license.
Specify the port number where you want to enable or disable trunking. This
operand is required.
Specify 1 to enable this port for trunking. Specify 0 to disable this port for
trunking. This operand is required.
switch:admin> portCfgTrunkport 5, 1
Committing configuration...done.
1
Telnet Commands
1-177