Nbrstateshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

nbrStateShow

Display FSPF neighbor's state.
Synopsis
nbrStateShow [port]
Availability
All users
Description
Use this command to display information about neighbors to the local switch, or information about
a specific neighbor if a port number is supplied. A neighbor is a switch that is directly attached to
the local switch.
The display shows the following fields:
Local Domain ID Domain number of local switch.
Local Port
Domain
Remote Port
State
Operands This command has the following operand:
port
Examples
To display information about switches directly connected to the local switch:
See Also
interfaceShow
Fabric OS Reference
E_Port (interface) on local switch.
Domain number of remote switch.
E_Port (interface) on remote switch.
State of the neighbor. The E_Port is used to route frames only if the neighbor is
in NB_ST_FULL state.
Specify the port on the local switch that connects to the neighbor being
displayed. Valid values for port number vary depending on the switch type. This
operand is optional.
switch:admin> nbrStateShow
Local Domain ID: 15
Local Port Domain
-------------------------------------------------------
2 13
6 13
7 13
13 3
Telnet Commands
Remote Port State
13 NB_ST_FULL
9 NB_ST_FULL
8 NB_ST_FULL
7 NB_ST_FULL
1
1-135