Cfgclear - HP StorageWorks 8B - FC Entry Switch Reference Manual

cfgClear

Clears all zone configurations.
Synopsis
cfgClear
Availability
admin
Description
Use this command to clear all zone information in the transaction buffer. All defined zone objects
in the transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer
while a zone configuration is enabled, a warning is displayed, to first disable the enabled zone
configuration or to provide a valid configuration with the same name.
After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to
commit the transaction, and clear the zone configuration in flash for all the switches.
Note:
Operands None.
Example To clear all zones, then commit the changes to both volatile and non-volatile memory (assuming no
enabled configurations):
See Also
cfgDisable
cfgEnable
cfgSave
Fabric OS Reference
This command requires a Zoning License.
switch:admin> cfgClear
switch:admin> cfgSave
1
Telnet Commands
1-19