tempShow
Display temperature readings.
Synopsis
tempShow
Availability
All users
Description
Use this command to display the current temperature readings from each of the five temperature
sensors located on the main printed circuit board of the switch. The sensors are located,
approximately, one in each corner and one at the center of the PCB.
Operands
None.
Example
To display the temperature readings for a switch:
See Also
fanShow
psShow
Fabric OS Reference
switch:admin> tempShow
26
26
27
27
26
78
78
80
80
78
Centigrade
Fahrenheit
1
Telnet Commands
1-265