1
Telnet Commands
fwConfigure
Displays and allows modification of the Fabric Watch configuration and status.
Synopsis
fwConfigure
Availability
admin
Description
Use this command to display and modify threshold information for the Fabric Watch configuration.
Switch elements monitored by Fabric Watch are divided into classes, which are further divided into
areas. In addition, each area can include from 0 to 16 thresholds.
Note:
The Fabric Watch classes and areas are provided in the following list.
Table 1-9
Class
Fabric
Environmental
Port
1-80
This command requires a Fabric Watch License.
fwConfigure Fabric Watch classes and areas
Area
Loss of E_Port
Fabric reconfigure
Segmentation changes
Domain ID changes
Zoning changes
Fabric to QuickLoop changes
Fabric logins
GBIC state change
Temperature
Fan
Power supply
Link failure count
Loss of synchronization count
Loss of signal count
Primitive sequence protocol error
Invalid transmission word
Invalid CRC count
Receive performance
Transmit performance
State changes
Fabric OS Reference
Need help?
Do you have a question about the StorageWorks 8B - FC Entry Switch and is the answer not in the manual?