Perfaddwritemonitor - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

perfAddWriteMonitor

Add a filter-based monitor for the SCSI Write command.
Synopsis
perfAddWriteMonitor port [, "alias"]
Availability
admin
Description
Use this command to define filter-based monitors to count the number of SCSI FCP Write
commands in Fibre Channel frames.
After a successful execution of this command, a monitor number is displayed. The monitor number
is provided for easy manipulation of these filter-based performance monitors. The optional user-
defined alias is also displayed if one was specified. All valid monitor numbers and user-defined
aliases can be retrieved with the perfShowFilterMonitor command.
The maximum number of filters is 8 per port including user-defined filters, read filters, write filters
and read/write filters.
Operands This command has the following operands:
port
alias
Example
To add a SCSI Write command monitor to a port:
See Also
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
1-150
Specify the port number where you want to add a SCSI Write command monitor.
This operand is required.
Specify a name for this monitor. This character string can be a maximum of 10
characters long and is truncated if more characters are specified. This operand
must be enclosed in quotation marks. This operand is optional. The default alias
is SCSI_Write.
switch:admin> perfAddWriteMonitor 2
SCSI Write monitor #0 successfully added
switch:admin>
Fabric OS Reference