Quickloop Commands - HP StorageWorks 8B - FC Entry Switch Reference Manual

3
Licensed Telnet Commands
Table 3-1
Command
zoneShow
QuickLoop Zoning
qloopAdd
qloopCreate
qloopDelete
qloopRemove
qloopShow
Zone Configuration
cfgAdd
cfgCreate
cfgDelete
cfgRemove
cfgShow
Zone Management
cfgClear
cfgDisable
cfgEnable
cfgSave
cfgTransAbort

QuickLoop Commands

The following commands are available with the standard QuickLoop license key. For detailed
information about QuickLoop refer to the QuickLoop User's Guide.
Table 3-2
Command
qlDisable
qlEnable
qlPartner
qlPortDisable
3-2
Zoning Commands (Continued)
Description
Show zone information.
Add a member to a QuickLoop.
Create a QuickLoop.
Delete a QuickLoop.
Remove a member from a QuickLoop.
Show QuickLoop information.
Add a zone to a zone configuration.
Create a zone configuration.
Delete a zone configuration.
Remove a zone from a zone configuration.
Show zone configuration definition.
Clear all zone configurations.
Disable a zone configuration.
Enable a zone configuration.
Save zone configurations in flash memory.
Aborts the current zoning transaction.
QuickLoop Commands
Description
Disables QuickLoop mode on the switch.
Enables QuickLoop mode on the switch.
Specifies a partner for a QuickLoop or displays information
about the existing partner.
Disables a port from QuickLoop mode.
Fabric OS Reference