Perfshoweemonitor - HP StorageWorks 8B - FC Entry Switch Reference Manual

perfShowEEMonitor

Display end-to-end monitor information and frame traffic on a port.
Synopsis
perfShowEEMonitor port[, interval]
Availability
admin
Description
Use this command to display end-to-end monitor information and frame traffic on a port. This
command can display (if no interval operand is specified):
•
Key - the monitor number
•
SID - Sending ID
•
DID - Destination ID
•
Owner_app - TELNET or WEB_TOOLS
•
Owner_ip_addr - the IP address of the owner of the filter monitor
•
Tx_count - Transmitting frame count
•
Rx_count - Receiving frame count
•
Crc_count - CRC error count
If you do not specify a value for the interval operand this command displays end to end monitor
information and a cumulative count of the traffic detected by the monitor. If you specify a value for
the interval operand this command displays a snapshot of the traffic at the specified interval.
Operands
This command has the following operands:
port
interval
Fabric OS Reference
Specify the port number where you want to display the end-to-end traffic. This
operand is required.
Specify an interval in seconds. This operand is optional.
1
Telnet Commands
1-161