HP StorageWorks 8B - FC Entry Switch Reference Manual page 248

1
Telnet Commands
Example The example shows the non-interactive form of sgroupSwReplace. The sgroupShow command is
used to illustrate the changes made with the sgroupSwReplace command. To replace a member of
an sgroup:
switch:admin> sgroupShow
Group Type
================ ================================ =======================
S32_6_1
switch:admin> sgroupSwReplace "NewGroup", "10:00:00:60:69:20:22:22",
"10:00:00:60:69:20:55:55"
Committing configuration...done.
switch:admin> sgroupShow
Group Type
================ ================================ =======================
S32_6_1
See Also
sgroupDelete
sgroupRename
sgroupSet
sgroupShow
sgroupSupportShow
1-234
Group Name
NewGroup
Group Name
NewGroup
Member WWN
10:00:00:60:69:20:15:71
10:00:00:60:69:20:15:93
10:00:00:60:69:20:15:2a
10:00:00:60:69:20:18:32
10:00:00:60:69:20:22:22
10:00:00:60:69:20:64:31
Member WWN
10:00:00:60:69:20:15:71
10:00:00:60:69:20:15:93
10:00:00:60:69:20:15:2a
10:00:00:60:69:20:18:32
10:00:00:60:69:20:55:55
10:00:00:60:69:20:64:31
Fabric OS Reference