Perfdeleemonitor - HP StorageWorks 8B - FC Entry Switch Reference Manual

perfDelEEMonitor

Delete an end-to-end monitor on port.
Synopsis
perfDelEEMonitor port[, monitor]
Availability
admin
Description
Use this command to delete an end-to-end monitor on a port.
Operands
This command has the following operands:
port
monitor
Example To delete an end-to-end monitor:
See Also
perfShowEEMonitor
perfAddEEMonitor
Fabric OS Reference
Specify the port number where you want to delete an end-to-end monitor. This
operand is required.
Specify the monitor number you want to delete. Monitor numbers are defined
when you create the monitor on a port. This operand is optional. When not
specified, all monitors on the port are deleted.
perfDelEE
switch:admin>
End-to-End monitor number 5 deleted
switch:admin>
Monitor 2, 5
1
Telnet Commands
1-155