Portenable - HP StorageWorks 8B - FC Entry Switch Reference Manual
Fabric os reference manual (version 3.0)
Hide thumbs
Also See for StorageWorks 8B - FC Entry Switch:
- Reference manual (326 pages) ,
- User manual (161 pages) ,
- Getting started manual (60 pages)
Table of Contents
Advertisement
portEnable
Enable a switch port.
Synopsis
portEnable port
Availability
admin
Description
Use this command to enable a switch port. If the port is connected to another switch, the fabric may
reconfigure. If the port is connected to one or more devices, the devices can communicate with the
fabric.
For ports that come online after being enabled, the following indications may be sent to indicate a
state transition: RSCN, SNMP trap, Web pop-up window.
The front panel LED of an enabled and online port is green.
Operands
This command has the following operand:
port
Example
To enable port 4:
See Also
portDisable
portShow
switchShow
Fabric OS Reference
Specify the port number to be enabled. Valid values for port number vary
depending on the switch type. This operand is required.
switch:admin> portEnable 4
1
Telnet Commands
1-179
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks 8B - FC Entry Switch and is the answer not in the manual?