1
Telnet Commands
nbrStatsClear
Reset FSPF interface counters.
Synopsis
nbrStatsClear [port]
Availability
All users
Description
Use this command to reset the counters of FSPF frames transmitted and received on an interface.
Use this command with no operand to reset counters on all interfaces.
Operands
This command has the following operand:
port
Examples
To display how to reset the counters on port 4:
See Also
interfaceShow
portShow
switchShow
1-134
Specify the port number for the counters to be reset. Valid values for port number
vary depending on the switch type. This operand is optional.
switch:admin> interfaceShow 4
idbP
Interface 4 data structure:
nghbP
ifNo
defaultCost
cost
delay
lastScn
lastScnTime
upCount
lastUpTime
downCount
lastDownTime
downReason
iState
Type <CR> to continue, Q<CR> to stop:
Neighbor 4 data structure:
state
lastTransition
nghbCap
nghbId
idbNo
remPort
nflags
< ... sample output truncated ... >
= 0x10f61f40
= 0x10f61d90
= 4
= 1000
= 1000
= 1
= 5
= Mar 29 12:57:52.833
= 2
= Mar 29 12:57:52.833
= 1
= Mar 29 12:57:47.566
= 2
= UP
= NB_ST_FULL
= Mar 29 12:57:52.865
= 0x0
= 2
= 4
= 1
= 0x3
Fabric OS Reference
Need help?
Do you have a question about the StorageWorks 8B - FC Entry Switch and is the answer not in the manual?