Cfgdisable - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

cfgDisable

Disables an effective zone configuration.
Synopsis
cfgDisable
Availability
admin
Description
This command disables the current zone configuration. The fabric returns to non-zoning mode
where all devices see each other. It also commits the zone configuration in the transaction buffer to
volatile and non-volatile memory. This command stops the current zoning transaction.
After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to
commit the transaction, and clear the zone configuration in flash for all the switches.
If a transaction is open on a different switch in the fabric when this command is run, the transaction
on the other switch is automatically aborted. A message is displayed on the other switch notifying
the transaction abort.
Note:
Operands
None.
Example
To disable the current zone configuration:
See Also
cfgClear
cfgEnable
cfgSave
1-22
This command requires a Zoning License.
switch:admin> cfgDisable
Fabric OS Reference