Zoning Commands - HP StorageWorks 8B - FC Entry Switch Reference Manual

Licensed Telnet Commands
This chapter summarizes the commands that are only available with a license key.
•

Zoning Commands

•
QuickLoop Commands
•
QuickLoop Fabric Assist Mode Commands
•
Extended Fabric Command
•
Fabric Watch Commands
•
FC 6164 Commands
•
Trunking Commands
•
Performance Monitoring Commands
Note:
Zoning Commands
The following commands are available with the standard Zoning license key. For detailed
information about zoning refer to the Zoning User's Guide.
Table 3-1
Command
Zone Alias
aliAdd
aliCreate
aliDelete
aliRemove
aliShow
Zoning
zoneAdd
zoneCreate
zoneDelete
zoneRemove
Fabric OS Reference
on page 3-1
on page 3-2
on page 3-3
on page 3-4
on page 3-4
on page 3-5
For more information about Zoning, QuickLoop, Extended Fabrics, Fabric Watch,
Trunking, or Performance Monitoring refer to the specific user guide for that feature.
Zoning Commands
Description
Add a member to a zone alias.
Create a zone alias.
Delete a zone alias.
Remove a member from a zone alias.
Show zone alias definition.
Add a member to a zone.
Create a zone.
Delete a zone.
Remove a member from a zone.
on page 3-3
on page 3-5
Chapter
3
3-1