Quietmode - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

quietMode

Toggles shell quiet mode on and off.
Synopsis
quietMode [0|1]
Availability
All users (display)
admin (set/clear)
Description Use this command to change the output displayed on the switch console (serial port or telnet
session).
By default, quiet mode is off and all switch tasks can send output to the console, including output
caused by asynchronous events, such as the fabric reconfiguring, or devices logging in.
When quiet mode is on, only output produced by shell commands is shown; asynchronous output
produced by other tasks is suppressed.
Turn quiet mode on when driving a telnet session using a script that does not expect asynchronous
output.
Operands This command has the following operand:
0|1
If no operand is specified the current value is displayed.
Example
To display the current mode, then reset to ON:
See Also
ramTest
1-218
Specify 0 to disable quiet mode where all tasks are printed in the console. Specify
1 to set quiet mode where only shell commands are displayed in the console. This
operand is optional.
switch:admin> quietMode
Quiet Mode is OFF
switch:admin> quietMode 1
Committing configuration...done.
Quiet Mode is now ON
Fabric OS Reference