Basic Configuration Procedures; Setting The Telnet Timeout Value; Displaying The Firmware Version - HP StorageWorks 8B - FC Entry Switch Manual

Basic Configuration Procedures

This chapter provides information on basic configuration tasks for a switch.

Setting the Telnet Timeout Value

To set a new telnet timeout value:
1. Login to the switch as the admin user.
2. At the command line enter the following command:
timeout x
where x is the number of minutes before the telnet connection times out. If you specify 0 then
the telnet connection never times out. Timeout is disabled by default.

Displaying the Firmware Version

To display the firmware version:
1. Login to the switch as the admin user.
2. At the command line enter the following command:
version
This command displays the Kernel version, Fabric OS release number, and other information
about the firmware.
Fabric OS Procedures Guide
Chapter
2
2-1