Sgrouprename - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

sgroupRename

Rename a switch group.
Synopsis
sgroupRename ["oldsgName", "newsgName"]
Availability
admin
Description
This command renames a specified sgroup name to the given new name. The member list for the
renamed group is not modified. If any parameter is not specified, the session will become an
interactive session for which all the parameters will be prompted.
Note:
Operands
This command has the following operands:
oldsgName
newsgName
Example
To rename a switch group:
switch:admin> sgroupShow
Group Type
========== ============================= =======================
S32_6_1
switch:admin> sgroupRename "MyGroup", "MyNewGroup"
Committing configuration...done.
switch:admin> sgroupShow
Group Type
========== ============================= =======================
S32_6_1
See Also
sgroupDelete
sgroupSet
sgroupShow
sgroupSupportShow
sgroupSwReplace
1-226
This command is for the FC 6164 switch only.
Specify a character string in quotation marks containing the sgroup name to be
replaced, for example "MyGroup". This operand is optional.
Specify a character string in quotation marks containing the new sgroup name,
for example "MyNewGroup". This operand is optional.
Group Name
MyGroup
Group Name
MyNewGroup
Member WWN
10:00:00:60:69:00:00:20
10:00:00:60:69:20:15:81
10:00:00:60:69:10:02:18
10:00:00:60:69:20:15:71
10:00:00:60:69:00:30:05
10:00:00:60:69:00:60:11
Member WWN
10:00:00:60:69:00:00:20
10:00:00:60:69:20:15:81
10:00:00:60:69:10:02:18
10:00:00:60:69:20:15:71
10:00:00:60:69:00:30:05
10:00:00:60:69:00:60:11
Fabric OS Reference