Urouteshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

uRouteShow

Display unicast routing information.
Synopsis
uRouteShow [port],[domainnumber]
Availability
All users
Description
Use this command to display the unicast routing information for a port, as it is known by the FSPF
path selection and routing task. The routing information describes how a frame, that is received
from a port on the local switch, is to be routed to reach a destination switch.
The following information is displayed:
Local Domain ID:Domain number of local switch.
In Port:
Domain:
Out Port:
Metric:
Hops:
Flags:
Next (Dom, Port):Domain and port number of the next hop. These are the domain number and the
Operands This command has the following operands:
port
domainnumber
If no operand is specified, this command displays routing information for all active ports on the
local switch, to all the domains in the fabric.
Fabric OS Reference
Port from which a frame is received.
Destination domain of incoming frame.
Port to which incoming frame is to be forwarded.
Cost of reaching the destination domain.
Maximum number of hops required to reach the destination domain.
Indicates if route is dynamic (D) or static (S). A dynamic route is discovered
automatically by the FSPF path selection protocol. A static route is assigned
using the command uRouteConfig.
port number of the switch to which Out Port is connected.
Specify the port number you want to view the unicast routing information for.
Valid values for port number vary depending on the switch type. This operand is
optional.
Displays routing information for the specified port and domain. This operand is
optional.
1
Telnet Commands
1-279