Configshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

configShow

Display system configuration settings.
Synopsis
configShow ["textfilter"]
Availability
All users
Description
Use this command to view system configuration settings set by the configure command, as well as
the following settings:
•
Ethernet MAC address
•
NVRAM boot settings
Operands
This command has the following operand:
textfilter
Example
To display system configuration settings:
Fabric OS Reference
Specify a text string in quotation marks that limits the output of the command to
only those entries that contain the text string. The filter does not apply to the
ethernet MAC address and NVRAM data display settings.
switch:admin> configShow
Ethernet address: 0:60:69:0:60:10
Nvram data: fei(0,0)host:/usr/switch/firmware
g=192.168.1.254 u=user tn=switch
Type <CR> to continue, Q<CR> to stop:
diag.postDisable:
fabric.domain: 1
fabric.ops.BBCredit:
fabric.ops.E_D_TOV:
fabric.ops.R_A_TOV:
fabric.ops.dataFieldSize:
fabric.ops.mode.fcpProbeDisable:
fabric.ops.mode.isolate:
fabric.ops.mode.tachyonCompat:
fabric.ops.mode.unicastOnly:
fabric.ops.mode.useCsCtl:
fabric.ops.mode.vcEncode:
fabric.ops.vc.class.2:
fabric.ops.vc.class.3:
fabric.ops.vc.config:
fabric.ops.vc.linkCtrl: 0
fabric.ops.vc.multicast:
fc4.fcIp.address:
fc4.fcIp.mask: 255.255.255.0
fcAL.fanFrameDisable:
fcAL.useAltBBCredit:
lcdContrast: 128
licenseKey: None
rpc.rstatd: 1
rpc.rusersd: 1
0
16
2000
10000
2112
0
0
0
0
0
0
2
3
0xc0
7
192.168.65.62
0
0
1
Telnet Commands
e=192.168.1.62
1-35