Trunking Commands; Performance Monitoring Commands - HP StorageWorks 8B - FC Entry Switch Reference Manual

Trunking Commands

The following commands are available with the purchase of a Trunking license key. For more
detailed information about trunking refer to the ISL Trunking User's Guide.
Table 3-7
Command
portCfgTrunkport
switchCfgTrunk
trunkDebug
trunkShow

Performance Monitoring Commands

The following commands are available with the purchase of a Performance Monitoring license key.
For more detailed information about Performance Monitoring refer to the Performance Monitoring
User's Guide.
Table 3-8
Command
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
perfCfgClear
perfCfgRestore
perfCfgSave
perfClrAlpaCrc
perfDelEEMonitor
Fabric OS Reference
Trunking Commands
Description
Configure a port for trunking.
Configure a switch for trunking.
Debug a trunking connection.
Display information about trunking on a switch.
Performance Monitoring Commands
Description
Add an end-to-end monitor to a port.
Add an IP monitor to a port.
Add a SCSI Read monitor to a port.
Add a SCSI Read and Write monitor to a port.
Add a SCSI traffic frame monitor to a port.
Add a user-defined monitor to a port.
Add a SCSI Write monitor to a port.
Clear the performance monitoring settings from flash memory.
Restore performance monitoring settings from flash memory.
Save the current performance monitoring settings to flash
memory.
Clear an ALPA device CRC count by the port and ALPA.
Delete an end-to-end monitor on port.
Licensed Telnet Commands
3
3-5