Perfshowfiltermonitor - HP StorageWorks 8B - FC Entry Switch Reference Manual

perfShowFilterMonitor

Display filter-based monitor information and frame traffic for a port.
Synopsis
perfShowFilterMonitor port[, interval]
Availability
admin
Description
Use this command to display all the filter-based monitors defined on the specified port and the
traffic count values. This command can display (if no interval operand is specified):
•
Key - the monitor number
•
Alias - the monitor alias name
•
Owner_app - TELNET or WEB_TOOLS
•
Owner_ip_addr - the IP address of the owner of the filter monitor
•
Frame_count - cumulative 64 bit frame count
If you do not specify a value for the interval operand this command displays a cumulative count of
the traffic detected by the monitor. If you specify a value for the interval operand this command
displays a snapshot of the traffic at the specified interval.
Operands
This command has the following operand:
port
interval
Fabric OS Reference
Specify the port number where you want to display the filter monitors. This
operand is required.
Specify an interval in seconds. This operand is optional.
1
Telnet Commands
1-163