Aliremove - HP StorageWorks 8B - FC Entry Switch Reference Manual

aliRemove

Remove a member from a zone alias.
Synopsis
aliRemove "aliName", "member; member"
Availability
admin
Description Use this command to remove one or more members from an existing zone alias.
The member list is located by an exact string match, therefore, it is important to maintain the order
when removing multiple members. For example, if a zone alias contains "1,2; 1,3; 1,4" then
removing"1,3; 1,4" succeeds, but removing "1,4; 1,3" fails.
If all members are removed, the zone alias is deleted.
This command changes the Defined Configuration. For the change to become effective, an
appropriate zone configuration must be enabled using the cfgEnable command. For the change to
be preserved across switch reboots, it must be saved to flash memory using the cfgSave command.
Operands
This command has the following operands:
aliName
member
Example
To remove a worldwide name from "array1":
See Also
aliAdd
aliCreate
aliDelete
aliShow
Fabric OS Reference
Specify the name of the zone alias to have members removed in quotation marks.
This operand is required.
Specify a member or list of members to be removed from the alias, in quotation
marks, separated by semi-colons. An alias member can be specified by one or
more of the following methods:
•
Physical fabric port numbers
•
Worldwide names
•
QuickLoop AL_PAs
This operand is required.
switch:admin> aliRemove "array1", "3,5"
switch:admin> aliRemove "array1", "21:00:00:20:37:0c:76:8c"
switch:admin> aliRemove "array1", "0xEF"
1
Telnet Commands
1-11