HP StorageWorks 8B - FC Entry Switch Reference Manual page 115

idbNo
remPort
nflags
initCount
&dbRetransList
&lsrRetransList
&lsrAckList
inactTID
helloTID
dbRtxTID
lsrRtxTID
inactTo
helloTo
rXmitTo
nCmdAcc
nInvCmd
nHloIn
nInvHlo
nLsuIn
nLsaIn
attHloOut
nHloOut
attLsuOut
nLsuOut
attLsaOut
nLsaOut
Fabric OS Reference
IDB number. Should be equal to portnumber
Port number on the remote switch connected to this port.
Internal FSPF flags.
Number of times this neighbor was initialized, without the interface going down.
Pointer to the database retransmission list.
Pointer to the Link State Records (LSR) retransmission list.
Pointer to the Link State Acknowledgements (LSA) retransmission list.
Inactivity timer ID.
Hello timer ID.
Database retransmission timer ID.
LSR retransmission timer ID.
Inactivity time out value, in milliseconds. When this time out expires, the
adjacency with the neighbor switch is broken and new paths are computed to all
possible destination switches in the fabric.
Hello time out value, in milliseconds. When this time out expires, a Hello frame
is sent to the neighbor switch through this port.
Retransmission time out value, in milliseconds. It is used to transmit topology
information to the neighbor switch. If no acknowledgement is received within
rXmitTo, frame is retransmitted.
Total number of commands accepted from the neighbor switch. Number includes
Hellos, Link State Updates (LSU) and Link State Acknowledgements.
Number of invalid commands received from the neighbor switch. Usually
commands with an FSPF version number higher than the one running on the
local switch.
Number of Hello frames received from the neighbor switch.
Number of invalid Hello frames (Hello frames with invalid parameters) received
from the neighbor switch.
Number of LSUs received from the neighbor switch.
Number of LSAs received from the neighbor switch.
Number of attempted transmissions of Hello frames to the neighbor switch.
Number of Hello frames transmitted to the neighbor switch.
Number of attempted transmissions of LSUs to the neighbor switch.
Number of LSUs transmitted to the neighbor switch.
Number of attempted transmissions of LSAs to the neighbor switch.
Number of LSAs transmitted to the neighbor switch.
1
Telnet Commands
1-101