Msplmgmtactivate - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

msPlMgmtActivate

Activates the Platform DB Management service on all switches in the fabric.
Synopsis
msPlMgmtActivate
Availability
admin
Description
This command enables an admin user to activate the Management Server Platform Database
Management Service on all switches in the fabric. It is recommended that the admin user run the
msPlCapabilityShow command before issuing this command. If any switch within the fabric
is not capable of handling the Platform Management service, this command is rejected. When this
command is issued, all the switches in the fabric will have the Platform database management
service ENABLED.
The activation is saved to the non-volatile storage of each switch, so even after a reboot, a switch
will boot up with Platform Management service ENABLED.
By default, the Platform Management service is DISABLED.
Platform Database Management is available in firmware v2.3 and above. Lower level firmware
releases do not support Platform Database Management.
Operands
None.
Example
To activate Platform Database Management on all switches in the fabric:
See Also
msPlMgmtDeactivate
msPlatShow
msPlCapabilityShow
msPlClearDB
1-130
switch:admin> msPlMgmtActivate
Request Fabric to activate Platform Management services.... Done.
switch:admin>
Fabric OS Reference