HP StorageWorks 8B - FC Entry Switch Reference Manual page 203

Operands This command has the following operands:
count
saved
Example
The following example shows a section of the port log with an E_Port coming online. The ELP and
EFP exchanges are shown; a name service request was processed.
switch:admin> portLogShow 5
May 1 task
----------------------------------------------
06:48:01.623 interrupt
06:48:02.359 tFspf
06:48:04.699 tReceive
06:48:07.616 tReceive
06:48:07.616 tTransmit
See Also
portLogClear
portLogDump
uptime
Fabric OS Reference
Specify the maximum number of lines to display. Only the most recent count
entries are displayed. This operand is optional.
Specify a non-zero value to display the saved port log from the last switch fault.
See uptime for a list of conditions that cause a fault. count is ignored when
displaying the saved log. This operand is optional.
event port cmd args
scn 13 2
ioctl 13 ab ffffff,10
Rx 13 0 c0fffffd,00fffffd,00bb0045
Rx 13 40 02fffffd,00fffffd,0046ffff,14000000
Tx 13 0 c0fffffd,00fffffd,004600bc
1
Telnet Commands
1-189