Cfgadd - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

cfgAdd

Add a member to a zone configuration.
Synopsis
cfgAdd "cfgName", "member; member"
Availability
admin
Description Use this command to add one or more members to an existing zone configuration.
Quickloop names can be added as members with the restriction that all
Note:
Operands This command has the following operands:
cfgName
member
Example
To add two new zones to the configuration "Test_cfg":
See Also
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgEnable
cfgRemove
cfgSave
cfgShow
1-18
This command requires a Zoning License.
Specify a name for the zone configuration in quotation marks. This operand is
required.
Specify a member or list of members to be added to zone configuration, in
quotation marks, separated by semi-colons. Members can be specified in one or
more of the following methods:
•
Zone names
•
QuickLoop names
This operand is required.
switch:admin> cfgAdd "Test_cfg", "zone2; zone3; loop1"
Fabric OS Reference