HP StorageWorks 8B - FC Entry Switch Reference Manual page 261

Operands This command has the following operands:
firstPort
lastPort
nLog
Example
To display switch information for debugging:
See Also
switchShow
Fabric OS Reference
Specify the first port of a range of ports to dump information. The default (if no
operand specified) is to print state of port 0. If only firstPort is specified,
only information for firstPort is printed. This operand is optional.
Specify the last port of range of ports to dump information. If firstPort is
specified but lastPort is not specified, only firstPort information is
printed for the port based commands (portShow, portRegShow,
portRouteShow). If no operand is supplied, firstPort is set to 0 and
lastPort is set to maximum port of switch. This operand is optional.
Specify the number of lines of portLogDump to print:
•
0 = dump all lines (default)
•
N = dump the last N lines
•
<0 = skip portLogDump
This operand is optional.
switch:admin> supportShow
Kernel: 5.3.1
Fabric OS: v2.1
Made on: Tue Apr 6 16:57:22 PDT 1999
Flash: Thu Apr 1 10:23:43 PST 1999
BootProm: Thu Oct 1 13:34:29 PDT 1998
Up for: 12 secs
Powered for: 472 days, 19:15
Last up at: Tue May
Reason: Reboot
37 34 37 45
98 93 98 113
Power Supply #1 is absent
Power Supply #2 is absent
byRdzdSRxyczSe0D:
Web license
Diagnostics Status:
< ... sample output truncated ... >
Telnet Commands
2 10:48:21 2000
49 Centigrade
120 Fahrenheit
Tue Apr 6 16:22:34 1999
1
1-247